Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Liner & Rebuild in Deer Park: What to Know First
We provide independent Olympia Chimney chimney liner installation and rebuild work throughout Deer Park, NY, with most liner jobs completed in one day and full rebuilds typically running two to three days depending on what the masonry reveals once we open things up. Our pricing is straight from the estimate: the number you hear on the phone is the number on the invoice, and we don’t change it at the door. If your Olympia Chimney liner is cracked, rusting, or the flue tiles are spalling, we’ll show you the camera footage before we touch a single brick.
This page is for Deer Park homeowners who own a home with Olympia Chimney products and need to know what’s actually wrong, what it costs to fix, and whether it can wait. Call (631) 214-2108 and you’ll get a live person, not a voicemail box.
Key Takeaways
- Most Olympia Chimney liner failures in Deer Park show up as flaking metal, rust staining at the cleanout, or a fireplace that suddenly drafts poorly.
- We install OEM Olympia Chimney parts when they’re available and the right call; we’ll also tell you when a DuraFlex or HeatShield product does the same job for less.
- Every job carries our 90-Day Done Right Promise in writing. If it’s not right, one call brings Wendell and his crew back.
- Free estimates, no trip charge inside the county, and $40 off any repair over $200.
How Olympia Chimney Products Fail - and How We Fix Them
Olympia Chimney makes a solid product, but every liner system has its weak points, and Long Island winters find them. Here’s what we regularly see in Deer Park homes:
- Ventis stainless liner seam separation. The Ventis line is built for high-temperature wood burning, but years of heating and cooling cycles along the South Shore’s damp, salty air can work the seams loose where the liner sections join. We’ve pulled liners on homes off Commack Road where the seam had opened a quarter inch. The fix is a full liner replacement, not a patch. You can’t weld a liner back to factory spec once the seam metal has fatigued.
- Rust-through at the tee connection on older Olympia flexible liners. The tee where the liner meets the appliance connector takes the most abuse: hot exhaust hits it first, then condensation drips back down when the fire dies. On Olympia flexible liners installed before 2010, we see pinhole rust right at that connection point. The symptom is usually a faint smoke smell in the basement or a rust trail down the outside of the liner.
- Flue tile spalling behind an intact Olympia liner. This is the one nobody sees coming. The liner looks fine from the top, but the original clay tiles behind it have been absorbing moisture for decades. Deer Park’s freeze-thaw cycles are brutal. When those tiles start flaking, the debris collects between the liner and the old flue wall, and eventually you get blockage or a draft problem no amount of sweeping fixes. Our camera inspection shows this in about one out of every six Olympia liner jobs we diagnose.
- Improperly sized liner starving the draft. We see Olympia liners that were installed by someone who matched the liner to the flue opening instead of the appliance’s actual BTU output and flue requirements. A liner that’s too large never gets hot enough to draft properly, which means more creosote buildup and a fire that smokes back into the room. We size every replacement liner to the appliance, not the hole.
- Cap and crown failure pulling the liner out of alignment. The Olympia Chimney cap does its job until a storm or a falling branch knocks it loose. Once the cap shifts, rain gets in, the crown starts cracking, and water follows the liner down the chase. By the time you see a stain on the ceiling, the liner has usually been sitting wet for months. We replace the cap, rebuild the crown, and inspect the liner for water damage all in the same visit.
Our Olympia Chimney Chimney Liner & Rebuild Process
Here’s how a typical Olympia Chimney liner or rebuild job goes when you call Top Hat Chimney in Deer Park:
- 1
You call, a live person answers. You describe the problem, we ask a few questions, and we schedule a time that works. You get a real arrival window, and if anything slips, we call you.
- 2
We inspect and film everything. Wendell or one of his crew runs a camera down the flue. You see the footage. We don’t describe the problem; we show it to you. If it doesn’t need doing, we’ll tell you that too.
- 3
We give you a written price before any tools come off the truck. No surprises. The estimate covers parts and labor, and we’ll tell you up front whether OEM Olympia Chimney parts or a quality aftermarket option like DuraFlex makes more sense for your situation.
- 4
We do the work. For liner replacements, we pull the old liner, prep the flue, and run the new one. For partial or full rebuilds, we take down what’s unsafe and relaid it properly, with the right mortar and the right curing time.
- 5
We test it hot and cold. After the install, we run a draft test so you know the chimney pulls properly before we leave. Then we walk you through what we did and what to watch for.
- 6
You get the 90-Day Done Right Promise in writing. If anything isn’t right within 90 days, one call and we’re back. No additional charge.
What Olympia Chimney Chimney Liner & Rebuild Costs in Deer Park
Here are honest numbers for the Olympia Chimney jobs we most often do in Deer Park. Every estimate is free, and the price we quote is the price you pay.
- Stainless steel liner replacement (Olympia Chimney or equivalent): $1,450-$2,800 depending on flue height, roof access, and whether we need to remove a damaged section first.
- Flexible liner install for a wood stove or insert: $1,100-$2,200. Single-story ranches on the south side of Deer Park usually fall at the lower end; two-story homes with steep pitches run higher.
- Liner repair (minor rust repair, re-securing at the tee, cap reset): $250-$600. This is where we’ll tell you plainly if a repair buys you time or just delays the inevitable.
- Partial rebuild (crown replacement plus top three to five courses of brick): $1,800-$3,200.
- Full chimney rebuild from the roofline up: $4,500-$9,000 depending on chase dimensions, brick match, and whether scaffolding is required.
What moves the price: roof pitch, flue height, whether the old liner comes out easily or fights us, and whether we uncover masonry damage nobody could see from the ground. Call (631) 214-2108 for an exact quote. The estimate is free, and we’ll show you the camera footage before you spend a dollar.
Why Deer Park Homeowners Call Top Hat Chimney for Olympia Chimney Work
We’ve been doing this since 1999. Wendell Pike started Top Hat Chimney the old way: show up, tell the truth, do the work right, and answer the phone when somebody calls back. We’re not a franchise that rotated in last spring. We live and work in the same communities we serve, and Wendell has done inspections on homes right off Commack Road more times than he can count. Our license number is published, our address is real, and you’ll run into us at the hardware store on Saturday.
We work with Olympia Chimney products every week, and we also install and service DuraFlex, HeatShield, and Gelco systems. That matters because sometimes the best fix for your home isn’t another Olympia part; it’s a better-fitting equivalent from a brand we trust. We’ll tell you which is which and why. Every job gets the 90-Day Done Right Promise in writing, and every call gets answered by a live person, around the clock. If it doesn’t need doing, we’ll tell you that too.
FAQs
We’re an independent Olympia Chimney service provider, not a factory-authorized shop, so we can’t file warranty claims on your behalf. What we can do is install parts correctly so the warranty stays valid if you file it yourself, and we’ll document everything we find with camera footage so you have the evidence you need. We also back our own work with the 90-Day Done Right Promise.
Yes. We keep common Olympia Chimney connectors, caps, and liner components on the truck, and anything we don’t have we can source within a few days through our regional suppliers. If a part is backordered, we’ll tell you before you schedule, not after we’ve torn your chimney apart. Call (631) 214-2108 and we’ll check availability while you’re on the phone.
If the liner has pinhole rust, seam separation, or any hole bigger than a dime, you replace it. Patching a stainless liner is a temporary fix that costs more over two years than a full replacement does today. If the damage is purely cosmetic surface rust with full metal thickness intact, we’ll tell you that it can wait. We’ve talked dozens of Deer Park homeowners out of work they didn’t need; that honesty is pretty much the whole business model.
Most liner replacements are done in a single day, including the camera inspection, old liner removal, new liner install, and draft test. Full or partial rebuilds run two to three days, weather permitting. We’ll give you a real arrival window and call you if anything shifts. Call (631) 214-2108 for a free estimate and we’ll give you a straight answer on timing.
Best case: you keep burning and the liner keeps deteriorating until the draft gets bad enough that your fireplace smokes back into the house. Worst case: hot exhaust or embers reach combustible framing through a crack, and you’re looking at a chimney fire or a slow smolder you can’t see until it’s too late. Once a year, burn or no burn. Chimneys break in the off-season too. If you’re not sure whether your liner is still sound, call (631) 214-2108 and we’ll put a camera down it for you.
Contact Top Hat Chimney
If you own a home in Deer Park with an Olympia Chimney system and you want a straight answer about your liner or masonry, call us at (631) 214-2108. You’ll get a live person, a free estimate, and camera footage of whatever we find. $40 off any repair over $200, no trip charge inside the county, and 10% off always for seniors and veterans.
Written by Wendell Pike, Owner, Top Hat Chimney - Deer Park, NY at Top Hat Chimney, serving Deer Park and nearby areas.