Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Famco Flue Liner Replacement: The Deer Park Owner’s Guide
A Famco flue liner replacement in Deer Park typically runs $1,900 to $4,200 installed, depending on the liner diameter, chimney height, and whether the old liner comes out clean or fights us the whole way. We stock Famco-compatible stainless steel liner kits on the truck, and most replacements are done in a single day. The way owners usually find out their Famco liner has failed is a routine sweep that turns up rust flakes, a cracked seam, or camera footage showing a liner that’s given up after one Long Island winter too many.
Your flue doesn’t care how the fire looks. It cares how it breathes. And when a Famco liner goes, it stops breathing the way it should. That’s when you get the draft problems, the white staining on the exterior brick, or the fireplace smell in the living room come August.
Which Famco Models This Applies To
Famco makes flue liners in stainless steel and aluminum, sized for oil, gas, and wood-burning appliances. The liner diameter is the first thing we match: 4″, 5″, 6″, 7″, and 8″ are the common residential sizes here in Deer Park, with 6″ being the one we pull out of wood-burning fireplaces most often. If you have the original owner’s manual or a label on the old liner, that helps. If you don’t, we measure the flue and the appliance collar before ordering anything. Guessing at liner diameter is how you end up with a draft that pulls like a straw with a hole in it.
A note on OEM versus aftermarket: Famco no longer holds the market the way it did twenty years ago. Their older aluminum liners, especially on oil-fired furnaces in Deer Park basements, are what most callers are dealing with. We can order genuine Famco replacement sections. We can also fit quality stainless liner from DuraFlex or HeatShield that will outlast the original. The honest answer for most Deer Park homes is stainless, because our winters and summer humidity eat aluminum liners from the inside out. But if your appliance calls for aluminum, that’s what we’ll put back. We’re an independent chimney company, not a Famco dealer, so there’s no pressure to stick with one brand. There’s just the right part for your flue.
Signs Your Famco Flue Liner Replacement Is Failing
- Rust flakes or discolored bits in the firebox. This is liner material degrading from the inside. Once it starts flaking, it doesn’t stop. The liner is thinning, and the next phase is pinholes.
- White staining on exterior brick or the chimney crown. Moisture is working through the liner and into the masonry. Homeowners on streets off Deer Park Avenue see this on older chimneys and assume it’s the bricks. It’s usually the flue behind the bricks.
- The living room smell that won’t leave. A fireplace smell in July means combustion gases are backdrafting into the house. A failed liner lets those gases linger where they shouldn’t.
- Visible gaps, cracks, or misaligned sections on camera. Every single inspection we do includes a camera run. If the liner has separated at a seam, the footage will show it. You’ll see it with your own eyes, not just hear it from us.
- Higher heating bills with no other explanation. A liner that’s puckered or warped lets warm air escape steadily. Your furnace works harder. The bill tells you something’s wrong before your chimney does.
Replacement Cost & What’s Included
Here’s the breakdown we give every Deer Park homeowner before the first tool comes off the truck:
- Liner kit (Famco-compatible stainless): $600 – $1,400 depending on diameter and length
- Removal of old liner: $150 – $350
- Installation labor: $800 – $1,800 depending on chimney height and access
- Connector, top plate, and cap (if needed): $150 – $400
- Camera inspection and photo report: included
Most Famco flue liner replacements in Deer Park land between $2,200 and $3,400 total. Roof pitch matters. Two-story chimney with a steep pitch takes longer than a ranch off Grand Boulevard. The number you hear on the phone is the number on the invoice. We also honor $40 off any repair over $200, and seniors and veterans always get 10% off. The 90-Day Done Right Promise applies to every liner install we do. If something isn’t right, one call brings us back.
DIY or Call Us?
You can check a few things yourself. Look in the firebox for rust flakes. Run a hand along the damper for warping. Shine a flashlight up if you can get a decent angle. That’s about where a homeowner should stop. Liner replacement means working on the roof, often with a steep Long Island pitch, pulling sections that may be brittle enough to crumble inside the flue. A dropped section can wedge halfway down and turn a one-day job into a two-day headache. It also means matching the liner diameter exactly to the appliance. Get that wrong and you’ve created a carbon monoxide risk. That’s not fear talk. It’s why we tell people in Deer Park straight: let someone who has done this a few hundred times handle it.
If it doesn’t need doing, I’ll tell you that too. But if it does, call (631) 214-2108 and we’ll schedule a straight-up estimate.
FAQs
A stainless Famco liner in a Deer Park chimney should last 15 to 20 years before it needs replacing. Aluminum liners on oil furnaces run closer to 10 to 12 years, especially with the salt air and humidity swings we get here on the Island. If you’re burning wood every winter and skipping annual sweeps, expect the shorter end of that range. Call (631) 214-2108 for an inspection and we’ll tell you exactly what condition yours is in.
Sometimes, but not often. Small gaps at a seam can be patched, and a cracked section can occasionally be resleeved if the rest of the liner is solid. But once a liner starts flaking or separating, patching it is like putting a Band-Aid on a leaking hose. We’ll show you the camera footage and give you a straight answer. If repair makes sense, we’ll say so. If it doesn’t, we’ll say that too, and quote you a fair replacement. Estimates are free.
Most Famco flue liner replacements in Deer Park are done in one day. We arrive in the morning with the right liner on the truck, pull the old one, drop in the new one, connect it, and run a final camera check before we leave. A two-story chimney or a difficult roof pitch can stretch it into part of a second day, but we’ll tell you that upfront. Call (631) 214-2108 for an exact timeline on your chimney.
We keep Famco-compatible stainless liner kits in common sizes on the truck, so most jobs don’t wait on a parts order. For odd sizes or aluminum liners, we source directly and usually have the part within a day or two in Deer Park. We also work with DuraFlex and HeatShield liners for homeowners who want to upgrade from an older Famco. Call (631) 214-2108 and we’ll match the right liner to your flue, not the other way around.
If you’ve got a Famco flue liner that’s showing its age, call Top Hat Chimney at (631) 214-2108. Wendell Pike will pick up, ask about your chimney, and give you an honest number before anyone sets foot on your roof. Free estimates, no trip charge inside the county, and a 90-Day Done Right Promise on every job.
Written by Wendell Pike, Owner, Top Hat Chimney - Deer Park, NY at Top Hat Chimney, serving Deer Park and nearby areas.





Before
After
Before
After
Before
After